Do you need a Toyota key fob replacement? When your Toyota key fob battery runs out of juice, or you lose it somewhere near Anderson, you’ll need to get it replaced (either the battery, which is inexpensive or the key fob unit itself) as soon as possible. Luckily for you, Toyota of Muncie can order the correct part for you and teach you how to program it for your Toyota model. This guide will walk you through both reprogramming your Toyota key fob replacement and replacing the key fob battery, so you can get back on the roads near Pendleton and start enjoying the benefits of keyless entry.
How to Program a Toyota Key Fob
Turn the key in the ignition from “Off” to “On,” then repeat within five seconds. Remove the key from the ignition.
Within forty seconds of removing the key from the ignition, close and open the driver’s side door twice, and then insert and remove the key from the ignition as in step 1.
Make sure that you perform steps one and two within forty seconds. The door locks will cycle within three seconds after completing step two. The key fob programming will begin once the door locks are finished cycling.
Open the driver door to exit remote programming mode.
Toyota Key Fob Battery Replacement: Step-by-Step Guide
If you’re unable to use your Toyota key fob, then you’re probably due for a Toyota key fob battery replacement. To find out what type of battery your key fob uses, open your key fob case with the extra key you got with your new Toyota. If you have an older model, you can use a thin object to pry the case open. Once the Toyota key fob case is open, follow the instructions below:
Lift the circuit board to remove the battery.
What type of battery is in your Toyota key fob? The CR2032 battery is the most common and widely available online and at our parts center near Pendleton. These batteries cost around $5 to replace.
Once you have the new battery, replace the old one with the new in the case, then close it.
Test your Toyota key fob to make sure it’s working properly. If it isn’t, open the case and readjust the battery.
What to Do With a Broken Toyota Key Fob
Depending on the type of damage, our technicians may be able to fix your key fob. If the battery is fine and the key is damaged, we can cut you a new one. If the case is broken, but the electrical system works, we can replace the case. If your Toyota key fob has undergone significant water damage, you’ll need a Toyota key fob replacement.
Toyota Key Fob Replacement Cost
A complete Toyota key fob replacement can cost anywhere from $200 to $350. Browse our parts and service specials for applicable coupons, and contact us directly for an exact key fob replacement price quote.
Get Your Toyota Key Fob Replacement at Toyota of Muncie!
Whether you need a Toyota key fob battery replacement or another part or service, we’re here to help. Albany area car owners can turn to us for all their maintenance needs. Schedule an appointment at our service center for parts replacements or routine maintenance today.
Curious about the Toyota RAV4 towing package? Drivers from Anderson to Pendleton are drawn to the 2021 Toyota RAV4 due to its impressive towing capacity. So, how much can a Toyota RAV4 tow? Can a RAV4 tow a boat? Impressively, the 2021 Toyota RAV4 towing capacity is 3,500 pounds when properly equipped, allowing you to…
In 2020, the fifth generation of the Toyota Supra hit the streets of Anderson, redesigned and more powerful than ever! Upgraded suspension, engine, and exterior marked the 2020 edition, and the 2021 Supra promises to wow Pendleton with new engine options. With improved handling on Albany roads, the newest Toyota sports car is built for…
Anderson area drivers who are looking for optimal seating and cabin space are undoubtedly considering the Toyota Highlander. There are several editions on the market, the most recent being the 2019 Highlander and 2020 Highlander. Although they have similar features, the 2020 Highlander underwent a complete redesign, with additional features that were unavailable in the…